Post by muddawg on Feb 23, 2005 20:04:39 GMT -5
two stall will fit a small pickup, galvanized angle iron and galvanized hog panel framed with 3/4 inch treated plywood top with galvanized angle iron rails around it. Center divider is hog panel but box is made where you can slip a piece of plywood along the divider to block the view if you wanna haul a hog on one side. Painted camo. First $100 takes it. I built the box in the fall of 2004 and it has only been used 2 or 3 times. If you build a better box cheaper then I have a market for them. The material alone will cost you over $100 for this box. Hog panels are $22.00 here, 4 hinges and clasps are almost $20.00, treated 3/4 plywood is $28.00 a sheet, fasteners are about $6.00, the angle will cost you at least $.50 a foot and there is over 70 feet in it or about $35.00 worth plus paint will cost you $10.00. That's $121.00 worth of material. Like I said, the first $100 gets it.
Also have @100 feet of @40 inch wide 3/4 inch thick black rubber belting. Excellent for bed liners, flooring for horse stalls/trailers or dog pens as it will never rot. Will take $100 for the 2 rolls.
4 X 4 welded wire pens. $5.00 each There is 20 feet of wire in each pen counting the top.
Also have @100 feet of @40 inch wide 3/4 inch thick black rubber belting. Excellent for bed liners, flooring for horse stalls/trailers or dog pens as it will never rot. Will take $100 for the 2 rolls.
4 X 4 welded wire pens. $5.00 each There is 20 feet of wire in each pen counting the top.