|
|
Post by deerslayer11 on Aug 18, 2006 17:00:15 GMT -5
|
|
|
|
Post by NitroHunter on Aug 18, 2006 20:53:50 GMT -5
Sure woulda like to have been in there with ya!
|
|
|
|
Post by deerslayer11 on Aug 19, 2006 16:04:49 GMT -5
|
|
|
|
Post by deerslayer11 on Aug 19, 2006 18:57:09 GMT -5
|
|
|
|
Post by NitroHunter on Aug 19, 2006 21:23:33 GMT -5
Cool video and the exhaust don't sound too bad on the Bronco either!
|
|
|
|
Post by deerslayer11 on Sept 7, 2006 12:20:56 GMT -5
I got the axle shaft out and the new one in. Was a bastard to get out. Had to drill and tap it, then make a bracket to use as a puller.
Figured Id keep the homemade puller, Ill probably need it again. Took a piece of 1 1/2"x3" flat bar and drilled a hole in the center, then drilled and tapped 2 on the outer edges to pull with. Worked pretty good.
|
|
