Camo Vinyl

[jaclinto]

Is anyone expereinced in putting this stuff on www.camo4u.com Any pointers?

[noonebil]

I watched em apply this at the Buckarama this past fall.

1. Make sure surface is clean & cool (best to work in the shade).

2. Rough cut the panel to aprox height & length (err on the side of too much rather than too short).

3. Use a spray bottle to wet the surface of the panel you are applying to.

4. Peal backing from camoclad (it's best to have help here) & lay on body panel.

5. Using a squeegee, stary at one corner of the camoclad & remove water bubles from underneath. Work slowly so as not to cause wrinkles.

6. Use a utility knife to cut excess material from panel. Use small cuts to help with curved areas.

7. Allow to 'dry' for several hours before driving at any speed. Park in sun if possible.

Hope this helps.

[spambuster]

Stop the spam jaclinto is the worst he owns camo4u and is marketing director for camoclad and many other products call them at 8005858550 and tell them what you think about spam on our boards see
www.wild-about-trapping.com/blog.html
for more info

[Shorthair]

spambuster said:

Stop the spam jaclinto is the worst he owns camo4u and is marketing director for camoclad and many other products call them at 8005858550 and tell them what you think about spam on our boards see
www.wild-about-trapping.com/blog.html
for more info

Wow, that's interesting. Jim is this stuff true?